孔挤压强化对2124铝合金疲劳寿命及微观组织的影响

采用疲劳试验、透射电镜、扫描电镜及X射线衍射仪等方法研究了2124-T851铝合金厚板不同参数孔挤压强化后疲劳寿命与显微组织的变化。结果表明：孔挤压强化后试样的疲劳寿命先随挤压量的增大而升高，随后又迅速降低，挤压量为0.4 mm时疲劳寿命达到峰值，较未强化增加12.66倍；组织观察结果表明孔挤压强化后，在孔壁强化层内形成了位错胞状结构和残余压应力，并且随挤压量增大先迅速增加然后趋于平缓，强化层的形成可以有效延缓疲劳裂纹的扩展速率；同时，适当的孔挤压强化可改善表面粗糙度，降低裂纹萌生几率，从而提高材料的疲劳寿命。     

飞行员疲劳监测中的人眼定位及状态判别研究

飞行员驾驶疲劳是影响飞行安全的重要因素之一。常用基于人眼识别的方法对飞行员进行疲劳监测，其关键是人眼定位及状态判别。利用改进的平均合成滤波器算法定位人眼，根据模糊综合评价思想，判定人眼睁开闭合状态，根据PERCLOS疲劳检测方法对飞行员进行疲劳监测。实验表明，改进的人眼定位方法具有更高的精确度和鲁棒性，提出的人眼状态判定方法能够满足疲劳监测需要。为最终构建一种机载的、实时的、非接触式的飞行员疲劳监测系统提供了理论基础。     

基于对数正态分布的多部位疲劳结构的疲劳寿命预测方法

以实现多部位疲劳结构的寿命预测为目的,基于概率累积损伤法则,推导了基于寿命服从对数正态分布的概率疲劳寿命预测方法。根据损伤临界值与应力水平无关这一前提条件,将损伤临界值由传统确定性的值1转换为随机变量,累积损伤由确定性的中值损伤计算,建立了"中值累积损伤-概率损伤临界值"干涉模型。当对数寿命标准差恒定时,对比了所提出模型和基于Monte Carlo仿真的Miner累积损伤方法的寿命预测结果,验证了模型的准确性以及其方便快捷的优点;当对数寿命标准差变化时,损伤临界值由满足损伤等效的应力基准决定,此时亦可得到高精度的偏于安全的寿命预测结果。     

复合材料胶补飞机损伤金属结构疲劳寿命分析

针对复合材料单面胶接修理飞机损伤金属结构疲劳寿命分析时,多种失效模式耦合作用、残余热应力和附加弯曲力矩以及裂纹非均匀扩展的影响,提出了一种能够综合考虑上述影响因素的复合材料修理损伤金属结构疲劳寿命评估方法。算例分析结果与试验结果吻合,表明本文方法可为复合材料单面胶接修理损伤金属结构疲劳寿命估算提供参考。     

Conceptual design of a bioregenerative life support system containing crops and silkworms

This article summarizes a conceptual design of a bioregenerative life support system for permanent lunar base or planetary exploration. The system consists of seven compartments – higher plants cultivation, animal rearing, human habitation, water recovery, waste treatment, atmosphere management, and storages. Fifteen kinds of crops, such as wheat, rice, soybean, lettuce, and mulberry, were selected as main life support contributors to provide the crew with air, water, and vegetable food. Silkworms fed by crop leaves were designated to produce partial animal nutrition for the crew. Various physical-chemical and biological methods were combined to reclaim wastewater and solid waste. Condensate collected from atmosphere was recycled into potable water through granular activated carbon adsorption, iodine sterilization, and trace element supplementation. All grey water was also purified though multifiltration and ultraviolet sterilization. Plant residue, human excrement, silkworm feces, etc. were decomposed into inorganic substances which were finally absorbed by higher plants. Some meat, ingredients, as well as nitrogen fertilizer were prestored and resupplied periodically. Meanwhile, the same amount and chemical composition of organic waste was dumped to maintain the steady state of the system. A nutritional balanced diet was developed by means of the linear programming method. It could provide 2721 kcal of energy, 375.5 g of carbohydrate, 99.47 g of protein, and 91.19 g of fat per capita per day. Silkworm powder covered 12.54% of total animal protein intakes. The balance of material flows between compartments was described by the system of stoichiometric equations. Basic life support requirements for crews including oxygen, food, potable and hygiene water summed up to 29.68 kg per capita per day. The coefficient of system material closure reached 99.40%.     

直升机主起落架疲劳试验技术研究

以直升机主起落架疲劳试验为对象，对试验内容、试验方法、试验实施及试验结果进行分析。通过试验验证确定了起落架的疲劳危险区域，并为优化零件结构提供了依据。     

航空发动机材料寿命问题探讨

归纳了航空发动机材料的变形损伤机理,强调了变形物理机制模型在部件设计和全寿命预测管理方面的应用     

Assessing the feasibility of involving gaseous products resulting from physicochemical oxidation of human liquid and solid wastes in the cycling of a bio-technical life support system

The study addresses the possible ways of involving gaseous products produced by “wet” incineration of human wastes mixed with H₂O₂ in an alternating electric field in the cycling of the physical model of a bio-technical life support system (BTLSS). The resulting gas mixture contains CO₂ and O₂, which are easily involved in the cycling in the closed ecosystem, and NH₃, which is unacceptable in the atmosphere of the BTLSS. NH₃ fixation has been proposed, which is followed by nitrification and involvement of the resulting products in the mass exchange of the closed system. Experiments have been performed to show that plants can be grown in the atmosphere resulting from the closing of the gas loop that includes a physicochemical installation and a growth chamber with plants representing the phototrophic compartment of the BTLSS. The results of the study suggest the conclusion that the proposed method of organic waste oxidation can be a useful tool in creating a physical model of a closed-loop integrated BTLSS.     

Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap

A new type of aluminum lithium alloy (Al-Li alloy) Al-Li-S-4 was investigated by test in this paper. Alloy plate of 400 mm · 140 mm · 6 mm with single edge notch was made into samples bonded with Ti-6Al-4V alloy (Ti alloy) strap by FM 94 film adhesive after the surface was treated. Fatigue crack growth of samples was investigated under cyclic loading with stress ratio (R) of 0.1 and load amplitude constant. The results show that Al-Li alloy plate bonded with Ti alloy strap could retard fatigue crack propagation. Retardation effect is related with width and thickness of strap. Flaws have an observable effect on crack propagation direction.     

金属任意腐蚀损伤量的日历寿命计算模型和曲线

国际机械日历寿命研究,都是在假设已知腐蚀损伤容限Dc的前提下,求在这个Dc下的金属日历寿命。为了便于应用,本文不再假设腐蚀损伤容限Dc为已知数,而是把Dc当做变量,求金属任意腐蚀损伤量Di的日历寿命。本文通过多方面深入研究,发现腐蚀试验溶液的浓度dt与试验时间Ht的乘积除以试验获得的腐蚀损伤Dt等于一个常数。由此给出一种简单易行的金属任意腐蚀损伤量日历寿命的计算模型和相应的求解曲线。由此模型或曲线,可求得金属任意腐蚀损伤量的日历寿命。